User's Manual

12
Tablet Software Installation for Windows* and Macintosh
After connecting all cables of Cintiq, turn on Cintiq and your computer. Allow the operating system to fully load.
Insert the Wacom Tablet Driver CD into the CD-ROM drive. The Wacom tablet software installer menu should au-
tomatically display. If the menu does not display, double-click on the INSTALL icon (located on the CD). Click on the
INSTALL CINTIQ
button and follow the prompts to install the driver software.
Windows:
After the driver installation is complete, make sure you can use your pen on the tablet display to move the
screen cursor.
Macintosh:
After the driver installation is complete, restart your Macintosh. You will be able to use your pen on the
tablet display to move the screen cursor.
Be sure to read the
README
file for late braking news.
If you have trouble in the Tablet software installation, refer to the Troubleshooting chapter in the online HelP in the Wa-
com Tablet Driver CD. You can also open the online Help from the
HELP
menu from the
WACOM TABLET
control panel.
Precede to
Customizing Your Cintiq - The Basics.
*
Windows 95 and later.
Installation