User's Manual

Calibrating the Tablet

You will need to calibrate the tablet in order to line up the screen cursor position with the position of the pen on the In-

teractive Pen Display. This is required to adjust for parallax caused by the clear plastic overlay. After setting the tablet in its

working position, follow the procedure below to calibrate the tablet.

From the

WACOM TABLET

Con-

trol Panel, select the

CALIBRA-

TION

tab.

If you are working with

multiple monitors, select the

Monitor that corresponds to

the tablet’s LCD display.

Click on the

CALIBRATE...

but-

ton to display the monitor

calibration screen.

Hold the pen as you normally

do, and use the pen tip to

click on the cross-hairs in the

upper-left corner.

Then click on the cross-hairs

that are displayed in the lower-

right corner. (For Windows

systems, you will need to click

APPLY

for the changes

to take effect.)

NOTE: The calibration setting

applies to all applications.

Customizing Cintiq – The Basics