User's Manual

ManualsBrandsCoretronic ManualsLED & LCD TVsLCD Monitor

LCD Display Adjustment and Functions

Factory Presets, Multi-sync, and User Settings

Factory Presets:

To display images with the best quality (based on the incoming signal), Cintiq comes with a number of

factory default standard display modes. Refer to page 27 for input signal speciﬁcations.

Multi-sync:

When connected as a VGA display, Cintiq attempts to automatically synchronize to the incoming signal. If

Cintiq does not automatically synchronize with the incoming signal, you can use the OSD

RESET, AUTO ADJUST

option

to initiate display synchronization. If necessary, further screen display adjustments can be manually made using the On

Screen Display (OSD) controls.

User Settings:

When you manually set the display using the On Screen Display (OSD) function, the settings are stored

within Cintiq for use the next time the unit receives a similar signal. This is applicable to all display modes.

Working with OSD (On Screen Display) Menu

To open the main MENU

, press the

button.

Use the plus ( ) or minus ( ) buttons to select an option. When the option you want to ad-

just is highlighted, press the

ENTER

button. The current settings and adjustment sub-menu

for that option will appear.

Use the plus ( ) or minus ( ) buttons to adjust the option settings.

When you have made your changes,

press the

ENTER

button to save.

To exit,

press the

button. All settings

are automatically saved when the OSD menu closes.

Contrast

Select to increase or de-

crease image contrast.

Brightness

Select to increase or de-

crease image brightness.

Phase (VGA only)

Select to reduce or elimi-

nate horizontal distortion

lines.

☞

P18

To automatically adjust,

use the

RESET

option.

Pitch (VGA only)