User's Manual

21
Working with the Cintiq StandI
Adjusting Tilt
The stand allows Cintiq’s tilt to be adjusted to any angle between 77 and 20 degrees from vertical. To adjust the incline,
from the front of Cintiq grasp the Interactive Pen Display on the left and right side at approximately the same height as
the Cintiq stand adjustment levers. Use your fingertips to gently pull the incline adjustment levers toward the display unit;
this will release the stand’s clutch mechanism. Tilt the display to adjust the incline setting.
To lower Cintiq:
Pull the left incline adjustment lever toward Cintiq and gently lower Cintiq to the desired incline angle. Release the lever to
lock the stand in place.
To raise Cintiq:
Pull the right incline adjustment lever toward Cintiq and gently raise Cintiq to the desired incline angle. Release the lever
to lock the stand in place.
Note:
The stand adjustment levers may exhibit some natural play before the clutch mechanism engages. For the most
accurate incline adjustment, first raise the incline slightly higher than you plan to work with, then lower the display to the
desired position.
As a tablet
As you work with Cintiq, you can rest your hand lightly on the display screen, just as if
it were a drawing board or sheet of paper.
As a display
This is a common position when using Cintiq as a primary display, and when your work
requires a large amount of keyboard input. This is also useful when presenting your
work to co-workers or clients.