User's Manual

26
General Problem Hint
The image appears multiple times on the
display.
The color white does not display as white.
Do not extend the video cable. Do not use an input selector switch box.
■
Be sure the Cintiq color profile has been installed and is selected as the profile for use
with your operating system and applications. Verify also that the display is operating at
the factory default settings. If that is not sufficient, then adjust color as necessary. For
details on color management, refer to your operating system and application documenta-
tion.
■
Verify that the video cable and connectors are fully connected.
Display Troubleshooting
VGA Problem Hint
Display riffles or flickers
Display is not clear.
Display is doubled or tripled.
■
The display and LCD panel are not
lined up.
■
Display size is not correct.
■
Display riffles or shows moiré.
■
The display color is not even.
■
Open the OSD menu, go to the
RESET
menu, and select the
AUTO ADJUST
option. Then,
if necessary, manually adjust
PITCH
and
PHASE
.
☞
P15, 17
■
Verify that the display adaptor or graphics card matches Cintiq specifications.
■
Adjust the refresh rate of your computer.
■
As necessary, adjust
CONTRAST
or
BRIGHTNESS
.
☞
P15
■
As necessary, adjust
PITCH
and
PHASE
.
☞
P15, 17
■
Set the
display resolution of your video card
to 1600 x 1200.
■
Do not extend the video signal cable. Do not use an input selector.
■
Open the OSD menu, go to the
RESET
menu, and select the
RECALL
option.
■
Adjust
PITCH
and
PHASE
,
HORIZONTAL
and
VERTICAL POSITION
.
☞
P15, 16,17.
Note that some graphics card may not show display in proper size.
■
Open the OSD menu, go to the
RESET
menu, and select the
RECALL
option.
■
As necessary, adjust
PITCH
and
PHASE
.
☞
P15, 17