User's Manual
Table Of Contents
- About Your Dell Projector
- Adjusting Projector Image
- Using Your Projector
- Using Network Display
- Configure Your Projector for Network Display
- Connect Projector Directly to the Computer
- Install Dell Network Projection Software on the Windows
- Install Dell Network Projection Software on the Mac
- Using the Dell Network Projection App (Windows)
- Using the Dell Network Projection App (Mac)
- Split Screen
- Understanding the Buttons
- Using PC-Free Presentation
- Set-up Bluetooth Speaker
- Using High Dynamic Range (HDR)
- Using Network Display
- Troubleshooting
- Maintenance
- Specifications
- Additional Information
- Contacting Dell
About Your Dell Projector 9
WARNING: Laser Safety Notice
This product is classified as CLASS 1 LASER PRODUCT - RISK
GROUP 1 according to IEC 60825-1 : 2014. Complies with FDA
regulations 21 CFR 1040.10 and 1040.11 as a Risk Group 1 , LIP (
Laser Illuminated Projector) as defined in IEC 62471:2006 except for
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
•
Failure to comply with the following could result in death or serious
injury.
•
This projector has a built-in Class 4 laser module. Never attempt to
disassemble or modify the projector.
•
Any operation or adjustment not specifically instructed in the User
manual creates the risk of hazardous laser radiation exposure.
•
Do not open or disassemble the projector as this may cause damage or
exposure to laser radiation.
•
Do not stare into beam when the projector is on. The bright light may
result in permanent eye damage.
•
When turning on the projector, make sure no one within projection range
is looking into the lens.
•
Follow the control, adjustment, or operation procedures to avoid damage
or injury from exposure of laser radiation.
•
The instructions for the assembly, operation, and maintenance include
clear warnings concerning precautions to avoid possible exposure to
hazardous laser radiation.