Product Brochure

CORIAN
®
SOLID SURFACE
PRODUCT BULLETIN
NA/ENGLISH
Corian® Solid Surface Product Bulletin 3/3
CORIAN
®
SOLID SURFACE
PRODUCT OVERVIEW
K-27478-NA 10/18
PLEASE VISIT OUR WEB SITE: WWW.CORIAN.COM OR CONTACT YOUR CORIAN
®
REPRESENTATIVE
FOR MORE INFORMATION ABOUT CORIAN
®
SOLID SURFACE
is information is based on technical data that E. I. du Pont de Nemours and Company and its affiliates (“DuPont”) believe to be reliable, and is intended for use by persons having technical skill and at their own discretion and
risk. DuPont cannot and does not warrant that this information is absolutely current or accurate, although every effort is made to ensure that it is kept as current and accurate as possible. Because conditions of use are outside
DuPont’s control, DuPont makes no representations or warranties, express or implied, with respect to the information, or any part thereof, including any warranties of title, non-infringement of copyright or patent rights of others,
merchantability, or fitness or suitability for any purpose and assumes no liability or responsibility for the accuracy, completeness, or usefulness of any information. is information should not be relied upon to create specifications,
designs, or installation guidelines. e persons responsible for the use and handling of the product are responsible for ensuring the design, fabrication, or installation methods and process present no health or safety hazards. Do not
attempt to perform specification, design, fabrication, or installation work without proper training or without the proper personal protection equipment. Nothing herein is to be taken as a license to operate under or a recommendation
to infringe any patents. DuPont shall have no liability for the use of or results obtained from such information, whether or not based on DuPont’s negligence. DuPont shall not be liable for (i) any damages, including claims relating
to the specification, design, fabrication, installation, or combination of this product with any other product(s), and (ii) special, direct, indirect or consequential damages. DuPont reserves the right to make changes to this information
and to this disclaimer. DuPont encourages you to review this information and this disclaimer periodically for any updates or changes. Your continued access or use of this information shall be deemed your acceptance of this disclaimer
and any changes and the reasonableness of these standards for notice of changes..
Copyright© 2018 E. I. du Pont de Nemours and Company. e Corian® Solid Surface Logo and Corian® are trademarks of E. I. du Pont de Nemours and Company or its affiliates. All rights reserved.
For making seams in countertops, repairs and custom edges, color-
coordinated Corian® Joint Adhesive should be used. When used in
accordance with manufacturer’s instructions, it provides a smooth and
inconspicuous joint. Corian® Joint Adhesive is available from Corian®
Design or its distributors.
Clearances
e minimum expansion clearance in inches for Corian® Solid Surface is
2.2 x 10
-5
in./in.°F x (length of the piece of Corian® Solid Surface in
inches) x (biggest temperature range expected in °F) In mm the minimum
expansion clearance is 3.9 x 10
-5
mm/mm °C x (length of the piece of
Corian® Solid Surface in mm) x (biggest temperature range expected in
°C). Joints to be caulked should be a minimum of
1
/16" (1.5 mm) wide
to allow satisfactory sealant penetration and expansion.
Precautions
Product dimensions are nominal. If tolerances are critical, review your
needs with a Corian® specialist.
AVAILABILITY AND COST
Availability
Corian® Design sheet, shape, and accessory products are readily
available through a worldwide network of Distributors and certified
Fabricators/Installers.
Cost
Cost varies with color, thickness, and width as well as custom fabrication
and installation details.
WARRANTY
DuPont offers limited commercial and residential warranties.
MAINTENANCE
Preventing Damage to Corian
®
Solid Surface
Avoid prolonged exposure to strong chemicals such as acids, bases, and
organic solvents. Spills should be cleaned up promptly. Refer to Corian®
Chemical Resistance (K-27406) for additional details regarding chemical
exposures, and Corian® Solid Surface Care and Maintenance for Facility
Managers (K-29810) for clean up, and general maintenance. In case of
exposure outside the specifications listed in the Class I Reagents section,
the 10-year limited product warranty will be void and handled as a case
of abuse. While unaffected by minor impacts, Corian® Solid Surface can
be damaged by heavy impacts, especially from pointed objects. It can
also be damaged by excessive heat. A local Corian® Design specialist can
help you include appropriate heat management into your designs.
Repairing Corian
®
Solid Surface
Corian® Solid Surface provides superior value by being inconspicuously
repairable in most cases. Minor cuts, scratches, and stains can be removed
by owners using fine sandpaper and Scotch-Brite™ pads. Deeper cuts or
impact damage such as cracks may require an authorized Corian®
fabricator/installer to make inconspicuous repairs.
ADDITIONAL INFORMATION
For additional information or support please contact your local
distributor, visit corian.com or call 1-800-4-CORIAN (800-426-7426).
REFERENCED DOCUMENTS
Corian® Performance Properties (K-26829)
Corian® Chemical Resistance (K-27406)
Corian® Commercial (Product Only) 10-Year Limited Warranty For North America
Corian® 10-Year Limited Residential Warranty For North America
Corian® Solid Surface Sheet Products (K-24016)
Corian® Solid Surface Sheet Color Options (K-26836)
Corian® Solid Surface Care and Maintenance for Facility Managers (K-29810)