Instructions / Assembly
CORIAN
®
SOLID SURFACE
PRODUCT FABRICATION BULLETIN
NA/ENGLISH
Corian® Solid Surface Product Fabrication Bulletin 1/1
CORIAN
®
SOLID SURFACE
DIRECTIONAL AESTHETICS
INTRODUCTION
Certain colors of Corian® Solid Surface require consideration of
directionality during design and fabrication. is directionality may impact
design, sheet layout and sheet utilization. For additional information
consult the appropriate bulletin referenced below. Colors may be listed
under multiple aesthetics. e Global Corian® Solid Surface Color Portfolio
contains colors that may be special order by region.
VEINED AESTHETICS
e following colors have directional veining and should be designed and
fabricated according to Corian® Solid Surface Product Fabrication Bulletin
– Veined Aesthetics (K-26828)
METALLIC AESTHETICS
e colors listed below have directional reectivity and should be
designed and fabricated according to Corian® Solid Surface Product
Fabrication Bulletin – Metallic Aesthetics (K-25703)
Arrowroot
Artista Beige
Artista Canvas
Artista Dust
Artista Gray
Ash Aggregate
Ash Concrete
Bleached Nuwood
Carrara Crema
Carrara Lino
Carbon Aggregate
Carbon Concrete
Cirrus White
Clam Shell
Cosmos Prima
Dune Prima
Evening Prima
Gray Onyx
Hazelnut
Juniper
Lava Rock
Limestone Prima
Natural Gray
Neutral Aggregate
Neutral Concrete
Nimbus Prima
Provence Nuwood
Rain Cloud
River Pearl
Rosemary
Sagebrush
Sand Storm
Sandalwood
Sepia Linear
Silver Linear
Smoke Drift Prima
Sorrel
Venaro White
Weathered Aggregate
Weathered Concrete
Whipped Cream
White Onyx
Windswept Prima
Witch Hazel
Evening Prima Silverite
MICA AESTHETICS
e colors listed below have directional reectivity and should be
designed and fabricated according to Corian® Solid Surface Product
Fabrication Bulletin – Mica Aesthetics (K-27484)
Deep Anthracite Sparkling White
REFERENCED DOCUMENTS
Corian® Solid Surface Product Fabrication Bulletin – Veined Aesthetics
(K-26828)
Corian® Solid Surface Product Fabrication Bulletin – Metallic Aesthetics
(K-25703)
Corian® Solid Surface Product FabricationBulletin – Mica Aesthetics
(K-27484)
is information is based on technical data that DuPont Specialty Products USA, LLC and its aliates (“DuPont”) believe to be reliable, and is intended for use by persons having technical skill and at their own discretion and risk. DuPont
cannot and does not warrant that this information is absolutely current or accurate, although every eort is made to ensure that it is kept as current and accurate as possible. Because conditions of use are outside DuPont’s control, DuPont makes
no representations or warranties, express or implied, with respect to the information, or any part thereof, including any warranties of title, non-infringement of copyright or patent rights of others, merchantability, or tness or suitability for any
purpose and assumes no liability or responsibility for the accuracy, completeness, or usefulness of any information. is information should not be relied upon to create specications, designs, or installation guidelines. e persons responsible
for the use and handling of the product are responsible for ensuring the design, fabrication, or installation methods and process present no health or safety hazards. Do not attempt to perform specication, design, fabrication, or installation
work without proper training or without the proper personal protection equipment. Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents. DuPont shall have no liability for the use of or results
obtained from such information, whether or not based on DuPont’s negligence. DuPont shall not be liable for (i) any damages, including claims relating to the specication, design, fabrication, installation, or combination of this product
with any other product(s), and (ii) special, direct, indirect or consequential damages. DuPont reserves the right to make changes to this information and to this disclaimer. DuPont encourages you to review this information and this disclaimer
periodically for any updates or changes. Your continued access or use of this information shall be deemed your acceptance of this disclaimer and any changes and the reasonableness of these standards for notice of changes.
e Corian® Solid Surface Logo and Corian® and all trademarks and service marks denoted with ™,
℠
or ® are owned by aliates of DuPont de Nemours, Inc. unless otherwise noted. © 2023 DuPont.
PLEASE VISIT OUR WEB SITE: WWW.CORIAN.COM OR CONTACT YOUR CORIAN® REPRESENTATIVE
FOR MORE INFORMATION ABOUT CORIAN
®
SOLID SURFACE
K-26833-NA 3/23