Installation Instructions

Product Subject to this Limited Warranty
This Limited Warranty applies only to the CORINTHIAN
™
SOLID SURFACE (the “Product”) sold by Midwest Manufacturing, a
division of Menard, Inc., (the “Company”).
Who is Entitled to this Limited Warranty
The Company grants this Limited Warranty solely in favor of the original purchaser of the Product (the “Original Purchaser”),
but to no other person or entity whatsoever. No person or entity, other than the Original Purchaser, shall have any right to
assert any claim under this Limited Warranty, or otherwise, in connection with the Product. This Limited Warranty is personal
to the Original Purchaser and may not be transferred by the Original Purchaser to any other person or entity, by contract,
operation of law, transfer of the property into which the Product are installed, or otherwise.
Length of this Limited Warranty
This Limited Warranty shall begin on the date of purchase of the Product and shall continue for a period of 15 years (such
periodoftime,the“WarrantyPeriod”),afterwhichthisLimitedWarrantyshallexpireandhavenofurtherforceoreect.
Corinthian
™
Solid Surface Countertops Limited Warranty
Care And Maintenance
Frequently Asked Questions
To clean the surface, wash with a mild dish washing liquid or powdered detergent; add warm water. Use a soft dish cloth.
Rinse with warm water and dry with cloth. Water is generally all that is needed. A quick wipe will clean most stains.
Periodically go over the entire surface with a mild abrasive cleaner or a wet blue Scotch-Brite
®
pad to maintain a uniform
appearance. For Harder to remove spots, use an all-purpose cleaner or bathroom cleanser. Follow the manufacturer’s
instructions. Rinse with warm water and dry with a soft cloth. Please note, do not use cleansers that contain harsh abrasives.
For stubborn spots, scrub the stained area with a mild abrasive cleaner using a blue Scotch-Brite
®
pad, working on a circular
motion.
Factoryintegratedsinkswillusethesameprocessoutlinedabove.Inaddition,tokeepthesinkbrightoccasionallyllit¼full
of water and add 1-2 cups of bleach. Wipe the sides and the bottom, let stand for 15 minutes, drain and rinse.
While Corinthian
™
SolidSurfaceshavedurablenishes,youshouldnotcutdirectlyonthesurfaceorlayanyutensilswarmer
than approximately 170t°F on the countertop for extended periods of time. Hot pans and heat-producing appliances (such as
electric griddles and skillets), when set directly on the countertops, can damage the countertop. Always use a hot pad or a
trivet. Pre-warm your sink bowl with hot tap water before pouring any boiling water into the sink in order to avoid possible heat
damage.
Corinthian
™
Solid Surfaces color and pattern are consistent throughout, allowing the tops to be renewed over and over.
Scratches canberemovedusingthesolidsurfacerenishingkit(SKU485-4283)availableintheCabinet&Appliances
department at your local store.
What is Corinthian Solid Surface made of?
- Corinthian
™
Solid Surface is made of 100% acrylic material.
Is Solid Surface repairable?
- Yes, Solid Surface is the only renewable countertop surface on the market today.
Is Corinthian
™
Solid Surface food safe?
- Yes, due to its non-porous nature, Corinthian
™
Solid Surface products are safe for food preparation.
How do I clean Corinthian Solid Surface?
- Soap, water and a soft dish cloth is generally all that is needed. Hard water marks can generally be removed using
ordinary vinegar. Bleach and harsh abrasive cleaners should NOT be used.
How can I bu out scratches that may occur?
- Scratches are more noticeable in dark colors, but Corinthian
™
Solid Surface is completely renewable and repairable using
theSolidSurfaceRenishingKit(Item#485-4283)foundatyourlocalMenardsstore.
Is Corinthian Solid Surface resistant to heat?
- While Corinthian
™
Solid Surface withstands heat better than most materials on the market, it can be damaged by extreme
temperature changes, whether sudden or prolonged. Always use a trivet with rubber feet when placing hot items on your
countertop surface. These items include, but are not limited to, pots, pans, and crock-pots.
Can I cut on a Corinthian Solid Surface Countertop?
- No, avoid cutting directly on countertops, always use a cutting board.
Do I need to add supports if I have an overhang?
- Overhangs of 10” should have support added. Any overhangs 15"ormorerequiresupporttotheoor.
For Everything Corinthian
™
has to Offer,
Visit www.midwestmanufacturing.com
Questions or Concerns:
For guest assistance contact countertop help by sending an
email to: [e-mail]
Share for a chance to win a $100 Gift Card!
Proudly share your completed project. Go to
and search for My Project Gallery to submit your project!