TABLE OF CONTENTS ADJUSTING YOUR LCD MONITOR • General safety precautions ………………….…………… 2 ………………………………… 5 ……………………………………………… 6 • Unpacking your monitor • Viewing angle • How to open the back cover ……………………………… 6 ………………………………… 7 ……………………………………………… 8 • Connecting your monitor • User controls • OSD (On-screen display settings) • Menu adjustments …………….…..……… 9 …………………………….…..……… 10 • Refining the picture APPENDIX - -------------2 ………………………….…..
Adjusting your lcd monitor General safety precautions This Monitor has been engineered and manufactured to assure your safety. Please read this manual and comply with the warnings and the procedures to avoid any serious electrical shock and other serious damage. 1. Do not place anything heavy, wet or magnetic on the monitor or power cord. Do not cover the ventilation openings nor touch them with metallic or flammable material. 2. High temperature can cause troubles.
Adjusting your lcd monitor 5. 6. 7. 8. Place the monitor on a flat surface to prevent it from falling. Do not apply any mechanical shocks to the machine. Install it in a well-ventilated area or secure enough space for ventilation. Turn the monitor off before connecting it to the power outlet.
Adjusting your lcd monitor 9. Make sure that the power cord and the other cords are properly connected. 10.Overloaded AC outlets and extension cords are dangerous. Also, the frayed power cords and the broken plugs may cause electric shock or fire. 11.Do not open the monitor. There are no user-serviceable components inside. There is a risk of exposure to highvoltage electricity inside, even when power is turned off.
Adjusting your lcd monitor Unpacking your monitor Please make sure the following items are included with your monitor. If you find that any of these items are missing or appear damaged, contact your dealer immediately. The power cord can be different depending upon different voltage areas.
Adjusting your lcd monitor Viewing angle Your monitor was designed to allow you to adjust it to a comfortable viewing angle. The viewing angle can be adjusted 5° to 30° forward and backward respectively as indicated by the arrow marks below.
Adjusting your lcd monitor Connecting your monitor Be sure to turn the computer off before connecting the monitor Cable connections g Connect the Video cable or S-Video cable to your DVD,VCR or camcorder. g Connect the video signal cable (15Pin connector) to the system’s VGA connector which is located on the back panel of the computer. g Connect the power adaptor cord to the monitor and then to the power supply.
Adjusting your lcd monitor User controls Front control buttons AUTO MENU SELECT DOWN UP POWER/ LED No. Key name 1 AUTO Activates the auto adjustment function. 2 MENU Opens the OSD menu. 3 SELECT Selects the main menu items and sub-menu items. 4 ◀ Moves to the lower menu item or sub-menu item. Decreases the value of the parameter. 5 ▶ Moves to the upper menu item or sub-menu item. Increases the value of the parameter. 6 POWER 7 8 LED Description Turns on/off the monitor.
Adjusting your lcd monitor OSD (On-screen display settings) OSD Operation 1. Press the menu button to open the menu system and display the main function menu. 2. Push the “◀”and “▶” buttons to move between the function icons. As you move from one icon to the other, the function name changes to reflect the function or group of functions represented by that icon. See the menu adjustments table to view a complete list of all the functions available for the monitor. 3.
Adjusting your lcd monitor Menu adjustments Icon Setting menu Sub-menus Auto Adjust. Brightness Contrast Position Image Audio Color (Analog/ digital) Color (video/ S-Video) Language 10 Description • Adjusts the Auto Config. (position & phase brief) • Adjusts the screen intensity. • Adjusts the contrast of the screen image. H-Position • Adjusts the horizontal position of the screen image. V-Position • Adjusts the vertical position of the screen image.
Adjusting your lcd monitor Setting menu Icon Input Select Analog •Selects the Analog RGB. Digital •Selects the Digital RGB. Video •Selects the Video. S-Video OSD Function Description Sub-menus •Selects the S-Video. H Position • Adjusts the horizontal position of the OSD menu. V Position • Adjusts the vertical position of the OSD menu. Off Timer • Adjusts the OSD display time during the absence of user control Preset Color 1 One of factory set of white balance.
Adjusting your lcd monitor Refining the picture Step 1 At first display, a full screen, such as window background or "H" character should be achieved by using editor. Adjust the screen to the center of the display (LCD), by using the top and bottom display controls (i.e. using V-Position menu). Step 2 Adjust the screen to the center of the display (LCD) by using the right and left display controls (i.e. using H-Position menu). Step 3 Adjust the Phase until the "H" character displays clear.
APPENDIX Power management function This monitor is equipped with a DPMS(Display Power Management Signaling) function that automatically cuts the power dissipation down to less than 5W when the computer is left unattended. Although the monitor can be left in power-saving mode for longer periods, we recommend that you turn it off after your daily work. Status Description Green Power on. Amber Power saving. Video input terminal A 15Pin D-Sub connector is used as the input signal connector.
APPENDIX (DVI-V tmds digital RGB) Pin No. Assignment Pin No. Assignment Assignment 1 DATA2- 11 DATA SHIELD 21 2 DATA2+ 12 DATA 3- 22 3 SHIELD 13 DATA 3+ 23 CLOCK SHIELD CLOCK+ 4 DATA 4- 14 +5V POWER 24 CLOCK- 5 DATA 4+ 15 GROUND(5V) 6 DDC CLOCK 16 HOT PLUG DETECT 7 DDC DATA 17 DATA 0- 8 N.C 18 DATA 0+ 9 TATA1- 19 SHIELD 10 DATA1+ 20 DATA 5- D-SUB DRAWING(CN10) 14 Pin No.
APPENDIX Display modes For the display modes listed below, the screen image has been optimized during production. Preset timing modes. Mode VGA SVGA XGA SXGA Display Mode 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 (Analog) Horizontal Frequency (KHz) 31.5KHz 31.5KHz 31.5KHz 37.9KHz 37.5KHz 35.2KHz 37.9KHz 48.0KHz 46.9KHz 48.4KHz 56.5KHz 60.0KHz 64.0KHz 80.
APPENDIX Troubleshooting Warning : This section will try to anticipate potential problems that you may encounter in the day-to-day use of your monitor. If after trying the suggested solutions, your monitor’s symptom remains the same, contact your authorized service center. Troubleshooting problems Problems LED Green No Picture LED OFF LED Amber Display is not clear 16 Corrective Actions • Using OSD, adjust Brightness and Contrast to maximum or reset to their default settings.
APPENDIX Problems Corrective Actions Out of Range • Check the maximum resolution and the frequency on the video port of your computer. Picture is scrambled • Check the signal cable connection between the computer and monitor. Picture is fuzzy • Perform Auto adjust. Picture bounces or has wavy oscillations • Check the signal cable connection between computer and monitor. Picture appears to be ghosting • Check the signal cable connection between computer and monitor.
APPENDIX Specifications Type LCD viewable size Pixel pitch 0.2805mm(H) x 0.2805mm(V) Viewable angle Contrast ratio Horizontal / Vertical / Up / Down : 80 degrees Hard coating(3H), Anti-glard treatment of the front polarizer, Haze(13%) 300:1 (Typical) Response time 17ms(Rising), 18ms(Falling) Display mode Normally Black Glass surface Brightness INPUT VGA Input resolution I/O Connectors 250 cd/ m2 RGB Analog, Digital DVI-D(V) Fh : 31.
