Installation manual

Millennium II 6000 Installation Manual

B. Sample the finished drink. Increase or decrease the water ratio by inserting a flat blade screw-

driver into the slot behind the flavor label and turning the water flow control screw clockwise

(more water) or counter–clockwise (less water) until the desired water to concentrate ratio is

achieved. Repeat the procedure on the remaining valves.

C. Replace the flavor strips.

NOTE: If the flow control does not respond, there may be debris caught between the internal

ceramic spool and sleeve. Try dislodging the debris by pressing the dispense switch several

times or by turning the flow control adjustment screw all the way in and out several times.