Service manual

560001279SER

Delta Valve

1. Rotate faceplate, as shown, with valve facing barrel. Attach faceplate to two studs with nuts finger tight.

This holds assembly in place for applying torque to shank nut.

2. Place special spanner socket in two slots on shank nut, making sure slots are fully engaged. Tighten shank

nut, as shown, with torque wrench and spanner socket. Torque wrench setting is 10 lb–ft (or 120 lb–in).

Socket part number is 620711709.

NOTE: Do not use any other tool or method to tighten the shank nut.