Installation manual

Viper Installation Manual

CONTROL PANEL OVERVIEW

Behind the merchandiser is the control panel which includes the LCD display,

shown in Figure 6. This panel controls all the functions of the unit including

defrost cycles, viscosity control, sensing of supply pressures and the incoming

line voltage as well as other functions and features.

Figure 6

SETTING UP THE CONTROL PANEL

When the unit is initially powered up, the Main Check menu, shown in Figure 7,

is displayed.

Figure 7

The software runs tests on the flash memory and the EEPROM. If they pass,

PASS is displayed to the right of the appropriate line and the system displays the

System Check State screen, shown in Figure 8.

BARREL

STATUS

12:51P

MAR 04

#1 FREEZE 65

#2 FREEZE 96

MENU OFF ON DFRST SPIN

INITIALIZING

PLEASE STAND BY

FLASH:

EEPROM: