Installation manual

Viper Installation Manual

Figure 8

Once the System Check State verification is complete, the display automatically

displays the Barrel Status menu. This is the normal or home screen for the

system when the unit is running properly. It shows the status of all barrels in the

system, as shown in Figure 9. During initial powerup, the barrel status is off,

indicating that the unit is in idle mode, with refrigeration off, product delivery off

and the barrel motor off.

Figure 9

From this screen, all the other screens may be accessed. The following

procedures are required for initial setup of the unit.

• Set the Options

• Set the Clock

• Set the Sleep and Wake Times

• Set the Viscosity

Setting the System Options

The first items that should be set are the formatting options. These formatting

options are located in the Option Setup menu. To access the Option Setup

menu, press the MENU button on the Barrel Status menu. This displays the

MAIN menu, shown in Figure 10. Then press the SETUP button to display the

Option Setup menu, shown in Figure 11.

SW REV

UI 000.003

I/O 000.002

MOTOR 000.001

STATUS 000.001

BARREL

STATUS

12:51P

MAR 04

#1 OFF

#2 OFF

MENU OFF ON DFRST SPIN