Installation manual

Viper Installation Manual

Light (diet), FUB is for Frozen Uncarbonated Beverages and FUB-L is for Fro-

zen Uncarbonated Beverages - Light (diet). Each of these settings provides the

proper viscosity and temperature settings for the type of syrup being used.

Events Setup Menu

Events setup allows the user to set sleep periods for the unit and to lock out the

defrost cycle during peak busy times. Sleep periods and defrost lockouts may be

programmed for individual days of the week or for every day of the week,

depending on location requirements.

Setting Defrost Lockout

From the Barrel Status menu, shown in Figure 9, press the MENU button and

then press the SETUP button to display the Setup menu. Use the up and down

arrows on the right of the control to highlight the Events Setup menu, then press

GO to enter the menu (Figure 15).

This menu allows the user to set the unit for a sleep period on individual days or

all days of the week. It also provides a lockout for the automatic defrost cycle, so

that all barrels have product available during peak usage hours. The lockout can

also be set day by day or for all days with up to three lockout periods per day.

The defrost lockout affects all barrels in the unit. To set the defrost lockouts,

perform the procedure in Table 8. Defrost lockouts should be overlapped by 15

minutes for sequential lockout.

Table 8

Step Action Procedure

1 Set defrost lockout Open the Events Setup menu, shown in Fig-

ure 15

2 Select DAY Use the up and down arrows to highlight DAY.

3 Set DAY Use the + and - buttons at the bottom of the

display to set the desired day or all days.

4 Select DEFROST

LOCK 1

Use the up and down arrows to highlight

DEFROST LOCK 1.

5 Set hour field Use the left and right arrows to select the hour

field

6 Use the + and - buttons at the bottom of the

display to set the desired hour.

7 Set minute field Use the left and right arrows to select the

minute field

8 Use the + and - buttons at the bottom of the

display to set the desired minute (in 15 min.

increments).

9 Select AM/PM field If the 12 hour clock option is selected, use the

left and right arrows to select the AM/PM field.

10 Use the + button at the bottom of the display

to set the AM/PM field.

11 Save the setting Press the BACK button at the bottom of the

display to save the settings.