Installation manual

Viper Installation Manual
Publication Number: 621260373INS - 20 - © 2008-2009, IMI Cornelius Inc.
Figure 15
When the defrost lockout settings are complete, press the BACK button to save
the settings and return to the Select menu, shown in Figure 11.
Setting the Sleep and
Wakeup Times
Sleep and wakeup times are set on the Event Setup menu shown in Figure 15.
To set the sleep and wakeup times, perform the procedure in Table 9. Note:
Setting the wakeup time ahead of the sleep time on a given day will cause the
unit to go into the sleep mode for a week unless the operator initiates a manual
wakeup.
12 Select DEFROST
LOCK 2
Repeat Steps 2 through 11 for the DEFROST
LOCK 2 time, if desired.
13 Select DEFROST
LOCK 3
Repeat Steps 2 through 11 for the DEFROST
LOCK 3 time, if desired.
Table 8
Step Action Procedure
EVENT
SETUP
12:51P
MAR 04
DAY SUN
SLEEP 10:00 PM
BACK CLEAR - +
WAKEUP 08:00 AM
DEFROST LOCK 1: 05:15 PM
DEFROST LOCK 2: 09:30 AM
DEFROST LOCK 3: 12:00 PM
Table 9
Step Action Procedure
1 Set sleep and
wakeup times
Open the Events Setup menu, shown in Fig-
ure 15 by pressing the GO button.
2 Select DAY Use the up and down arrows to highlight DAY.
3 Set DAY Use the + or - buttons at the bottom of the dis-
play to set the desired day or all days.
4 Select SLEEP Use the up and down arrows to highlight
SLEEP.
5 Set hour field Use the left and right arrows to select the hour
field
6 Set minute field Use the left and right arrows to select the
minute field
7 Select AM/PM field If the 12 hour clock option is selected, use the
left and right arrows to select the AM/PM field.
8Select DAY for
Wakeup
Repeat Steps 1 through 3.
9 Select WAKEUP Use the up and down arrows to highlight
WAKEUP and repeat Steps 6 through 8 to set
the WAKEUP times.