Installation manual

Viper Installation Manual

When the sleep and wakeup settings are complete, press the BACK button to

save the settings and return to the Select menu, shown in Figure 11.

Setting Viscosity

The viscosity maintained in the freeze barrels depends on the type of product

being served. Some products are served best at a higher viscosity, while others

require a lower viscosity for best quality. The Viscosity menu allows the user to

adjust the viscosity in each barrel to the optimum setting for each type of syrup.

Refer to for Table 12 recommended settings based on syrup type.

To set all barrels in the system to the same viscosity setting, follow Table 10, and

then press the ALL button at the bottom of the display while highlighting the

viscosity setting you desire for all the barrels.

Figure 16

When the viscosity settings are complete, press the BACK button to save the

settings and return to the Select menu, shown in Figure 11.

Refer to the service manual for other controller functions and features.

10 Set Wakeup day/time Repeat Steps 5 through 7.

11 Save the WAKEUP

setting

Press the BACK button at the bottom of the

display to save the wakeup setting.

Table 9

Step Action Procedure

Table 10

Step Action Procedure

1 Set viscosity range From the Setup menu (Figure 11), open the

Viscosity Setup menu, shown in Figure 16

2 Select barrel Use the up and down arrows to highlight the

desired barrel.

3 Set range Use the + or - buttons at the bottom of the dis-

play to set the desired range.

4 Select barrel Repeat Steps 2 and 3 for each barrel in the

machine.

VISC

SETUP

12:51P

MAR 04

#1 VISC RANGE 4 40-96

#2 VISC RANGE 5 44-103

BACK ALL - +