Service manual

62TD 204
Cleaning Procedures
Approved ice machine cleaners by brand names:
S Lime-A-Way
S Calgon Nickel Safe (green color
only)
NOTE: All ice machine cleaners labeled safe for nickel ARE
NOT the brand CALGON NICKEL SAFE.
Caution: Ice machine cleaners are acidic-based chemi-
cals. Before begnning any cleaning of the cub-
er, the ice in the storage bin or dispenser must
be removed.
Caution: When using any chemical, rubber gloves and
eye protection should be worn.
Prep – Cleaning
Use full-strength ice machine cleaner on a coarse-surface cloth ma-
terial (such as terry cloth) and wipe down the inside wall of the evap-
orator area, the water pan, the water curtain and evaporator plastic
extrusions. If the water distributor tube has heavy scale build–up, re-
move and soak it in full-strength ice machine cleaner (or exchange
the tube and clean the scaled tube at a later date).
Cleaning the Water System &
Evaporator
Power Switch
1. Set the switch to Clean and allow any ice on the evap-
orator to release and melt away.
2. Remove all ice from the storage bin.
3. Remove the water curtain(s), pour 1/2 oz. (14.8 Mil)
of ice machine cleaner down the rear key-slot open-
ings. The cleaner will drain into the water pan.