Service manual

Quantum Series Installation and Service Manual

7. While holding the pump halves together by hand, reinsert the four thumb screws and tighten them in a

criss-cross pattern until the two halves are pressed together.

8. Insert the two stainless tubes into the hose ends and fasten them with new clamps using pliers to tighten

the clamps.

IMPORTANT: Replace platform in unit, reinstall nozzles and static mixers, connect water, install

product shelf and concentrate, and reconnect power to unit.

Figure 1.

Flush Lever

Juice Inlet

Stainless Steel

Concentrate Delivery

Tub es

BRIX

Adjusting

Screw

Hose Clamps

Pump Tubing

Thumb Screws

Rear Pump Half

Water Inlet

w/ Quick Connect

Quick Connect

Actuator

Removable Pump Platform

Mixed Product

Outlet

Latch