User manual

Thermostat Reset Upgrade Kit Installation Instructions

14. Remove contactor from box and connect main power and contactor harnesses, as shown.

IMPORTANT – Main power MUST be on same side as flag terminals already attached to contactor

(see photo). Remount contactor in box.

15. Feed the remaining 4 wires (2 red, 2

orange) through hole.

Snap bushing inserted.

Harness from

contactor box.

Main power lead

harness.

Contactor

harness

here.

Main power

harness

here.

Remount contactor in the box by

locating this screw than turn the

contactor to locate the other screw.

Feed these wires through the hole.