Coordinator (CST-N001) Manual 25th Aug 2019 US Representative Contacts Company name : Corners Global Address : 3949 Eden St, Philadelphia, PA 19114 Contact Name : Adel Ebeid
Contents 1. OVERVIEW ...................................................................................................................................................................... 3 2. INSTALLATION ............................................................................................................................................................... 4 2.1 CONNECTION GUIDE ...........................................................................................................................
1. OVERVIEW - CST-N001 controls up to 64 LoRa-based devices (CST-G001) and swiftly forwards sensing information received from CST-G001 to the server in case of an emergency. - The server should communicate evacuation information to CST-N001 through emergency evacuation algorithms, and CST-N001 should quickly communicate evacuation information received from the server to all CST-G001 so that casualties can be minimized through evacuation announcement and announcement.
2. INSTALLATION This chapter explains how to install CST-N001. It deals with LAN connection guides 2.1 Connection Guide In order to connect CST-N001 to network, you need to use RJ-45 Ethernet port. It supports both 10Mbps and 100Mbps Ethernet connection (auto-sensing). Since WAN/LAN port supports MDIX, it automatically detects any kind of cable. (Cross or direct LAN cable) Plug one end of the LAN cable to CST-N001 and the other end to a hub, switch, or any other network device. 2.
3. FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two condition: (1)This Device may not cause harmful, and (2)This device must accept any interface received, including interface that may cause undesired operation. Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.