User's Manual
Table Of Contents
- Corning
- Mid-Power Remote Unit (MRU)
- Preface Material
- About This Manual
- Hardware
- Software Warranty
- Returns
- Limitations of Liabilities
- Reporting Defects
- Warnings and Admonishments
- Regulatory Compliance Information
- RF Safety
- Laser Safety
- Care of Fiber Optic Connectors
- Company Certification
- Licensee Contact Information
- Table of Contents
- 1 Introduction
- 2 MRU Interfaces
- 3 Installation Guidelines
- 4 Installation
- 5 Appendix A: Specifications
- Supported Services
- Coupling Specifications
- Physical Specifications
- 6 Appendix B: Ordering Information
Appendix A: Specifications CMA-XXX-AEN Page 43
Draft
Coupling Specifications
Frequency (MHz)
Coupling (dB)
700 -26.0
800 -26.0
900 -26.0
1000 -26.0
1700 -26.0
1800 -26.0
1900 -26.0
2000 -26.0
2100 -26.0
2200 -26.0
2500 -26.0
2600 -26.0
Environmental
Operating Temperature
-40
◦
C to +65
◦
C (-40
◦
F to 149
◦
F)
Storage Temperature
-30° to 85°C (-22° to 185°F)
Standards and Approvals
Laser Safety
FDA/CE 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice no. 50 and IEC
60825-1
EMC/Radio
FCC 47 CFR Part 15, 22, 24, 27
Safety
UL 60950
IEC 60825-1:2007
IEC 60825-2:2010
CAN/CSA-C22.2 No.60950-1-03
NEBS
GR-63, GR-1089, GR-487 (with outdoor enclosure)
Optical
Optical Output Power
< 9 dBm
Max. Optical Budget
7 dB (5 dB over any temp, and optical variations)
Back Reflectance
- 60 dB
Optical Connector
LC APC SM
Fiber Type
Corning
®
SMF-28
®
fiber or compatible
Wavelength
1310 ± 10nm (@ 25
◦
C)