User's Manual

Corning Optical Communications DRAFT User Manual I CMA-XXX-AEN I Page 29
3 INSTALLATION GUIDELINES
Note the following:
• It is assumed that the site survey and installation planning (including power requirements) have been completed.
• Specifications of remote units are described in the corresponding datasheets and installation manuals.
This chapter provides installation guidelines for the Corning optical network evolution (ONE
™
) IHU, PSU6, and MRU. The
following installation rules are based on the assumption that the site survey and installation planning (including power
requirements) have been completed. This includes planning the distribution of antennas to provide the required coverage, as
well as planning the layout of the devices and cables in the telecom closet or shaft.
3.1 General System Specifications and Requirements
This section includes the environmental and physical specifications for the following units: HEU, OIU, IHU, CEU, ICU and
PSU6.
3.1.1 Environmental and Regulatory Specifications
3.1.1.1 Temperature and Humidity
The environmental specifications listed below are relevant to all Corning optical network evolution (ONE
™
) solution devices.
Operating
Storage
Temperature 0°C to +50°C (32°F to 122°F) -20° C to 85° C (-4°F to 185°F)
Humidity 95% (non-condensing) 95% (non-condensing)
Table 3-1. Temperature and Humidity Specifications
3.1.1.2 Safety and Regulatory Approvals
The safety and regulatory specifications listed below are relevant to all Corning optical network evolution (ONE
™
) solution
devices.
Regulation/Standard
Category
Approval
Laser Safety
FDA/CE 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser
notice no. 50 and IEC 60825-1
EMC
CE EN 301 489, EN55022, EN 61000
FCC 47 CFR Part 15, 22, 24, 27
Safety
UL 60950
IEC 60825-1:2007
IEC 60825-2:2010
CAN/CSA-C22.2 No.60950-1-03
Fire Safety UL 2043 (applicable for RAU5 only)
Table 3-2. Safety and Regulatory Approvals