User's Manual

Corning Optical Communications User Manual I CMA-490-AEN I Page 89
8.3 Cable Ordering Information
Cable Configurations
1
4
7
10
Connector.
Cu conductor count.
Fiber type.
Select cable length.
13 = MTP® Connector, SM
Elite
0 = 0 conductors U = ZBL Fiber
004 – 999 ft.
18 = LC/APC Duplex 4 = 4 conductors G = XB fiber
2
5
8
11
Connector. Cu connectors. Jacket type. Pulling grip type.
13 = MTP® Connector, SM
Elite
Cu = With connectors
8 = Plenum Indoor
P = One-sided pulling grip
18 = LC/APC Duplex
N = No connectors
3
6
9
12
Select cu wire gauge Fiber count.
Armored/non-armored Kit type
0 = No Cu Wire 06 = 6 fibers
20 = Non-armored
K = 2 Strain relief trunk holders
F = 12AWG 24 = 24 fibers
G = 14AWG 48 = 48 fibers
H = 16AWG 72 = 72 fibers
K = 20AWG 96 = 96 fibers
E4 = 144 fibers
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: [phone] • International: [phone] • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corn
ing Optical Communications products without prior notification. A complete listing
of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical
Communications is ISO 9001 certified. © 2016 Corning Optical Communications. All rights reserved. CMA-XXX-AEN / September 2016