User's Manual

Appendix : System Specifications Ordering Information
MA2000 Installation and Configuration Guide 58
6.1.5 Base unit Specifications
Models: 4-port model, 8-port model (shown above)
Supported services: Wideband device supporting all services supported by MA systems
RF (total Input): 10 dBm max
Power:
Input power 20 to 48V DC
Power consumption 14W (8-port BU)
RF connections N-type Female, 50 ohm – interface to RIU or to passive BTS interface
N-type Female, 50 ohm – interface to antennas
Optic connections Four or eight (depending on the model) SC/APC optic connections
Remote management SNMP, NMS via connection to SC-450 controller.
Physical
Dimensions 48.26x4.44x29.97cm (19”x1Ux11.8”)
Weight 2.82Kg (6.2lb)
Ordering Information
NOTE: The information listed below is updated up to the document publishing date. Refer to the MA2000 datasheet for
the most updated ordering information.
Remote HUBs
2000-RC-RP
2000-RC-LP
2000-MINI-ENC
Remote Cabinet - all services, Remote powering
Remote Cabinet - all services, Local powering
2000 enclosure supporting 2 modules
Dual Band RF Modules, add-on ready
MA2000 Cabinet
2000-CELL-DCSE
2000-CELL-PCSE
2000-GSMO-DCSE
2000-IDEN-SMR
2000-E-GSM-DCS
Dual band Cell/DCS 1 port for cabinet, enhanced power
Dual band Cell/PCS 1 port for cabinet, enhanced power
Dual band GSM DCS 1port for cabinet, enhanced power
Dual band iDEN/SMR for cabinet
Dual band EGSM/DCS 1 port for cabinet
MA2000-Lite
2000-CELL-DCSEL
2000-CELL-PCSEL
2000-E-GSM-DCSL
2000-GSMO-DCSEL
2000-IDEN-SMR-L
2000-CELL-DCSLT
2000-GSM-DCSLT
Dual band Cell/DCS 1 port for Lite, enhanced power
Dual band Cell/PCS 1 port for Lite, enhanced power
Dual band GSM/DCS 1 port for Lite, enhanced power
Dual band GSM DCS 1 port for Lite, enhanced power
Dual band iDEN/SMR for Lite
Dual band Cell/DCS 1 port for Lite enhanced power for Telstra
Dual band GSM/DCS 1 port for Lite enhanced power for Telstra
MA1200 Add-On