User's Manual

MobileAccessGX Installation and Configuration Guide 6
1.4 GX Unit Interfaces
All of the GX interfaces are located externally on the underside of the unit (facing down when
unit is mounted). The unit interfaces include the RF, power and optical link connectors.
Figure 1-6: GX Interfaces – Underside Panel
The following tables provide a description of the GX connectors and LEDs.
Connector Description
Service Connectors
(e.g. 850MHz, 700MHz, AWS)
DIN female connectors to antennas
OP SC/APC optical fiber access port (waterproof) connection
to OCH for either SM or MM fibers.
AC Remote Power (AC) Power feed options: 100-240 V AC
50Hz/60Hz
Max Power Consumption: 1400W
LAN RJ45 connector for local connection (i.e. debugging,
troubleshooting)
EXT_ALM N/A
FILTER_ IN/ FILTER_ OUT Connections to external filter
Table 1-1. Connector Descriptions
Connectors located
on underside panel
Filter In port
AC power
port
OP port
Filter Out port
RF Service connector
RF Service connector
RF Service connecto
r
RJ45 LAN
connector
RUN LED
Grounding
ALMLED
FSK LED