User's Manual

MobileAccessGX Installation and Configuration Guide 11
2.6 Installing the GX Unit
2.6.1 Unpacking and Inspection
Unpack and inspect the cartons according to the following procedure
1. Open the shipping carton and carefully unpack each unit from the protective packing
material.
2 Please verify that the items listed below are included in your package (image size is not
proportional):
Item Qty. Image
MobileAccessGX Remote Unit 1
Mounting Brackets and loosely assembled:
Nuts M8, Spring Washers Φ8, Plain
Washers Φ8 (used for securing Remote
Unit when hanged on bracket protrusions)
2
3 (per bracket)
Masonry Bolt (set) M10x110 – used for wall
mount
installations
4
2 (per bracket)
Hose Clamp (Φ30-Φ125) - used for pole
mount
installations (2 per bracket)
4
Optical Connector 2 -
Power Supply Cable (AC) 1
Copper Grounding Wire (2m) 1