Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsGX High Power DAS Remote Unit, Repeater
31323334353637383940
MobileAccessGX Installation and Configuration Guide 24
3.1.2 IP Address Configuration
Set the SC-450 LAN port for remote control via
static or dynamic IP
address.
.
NOTE: Local setup and troubleshooting is performed via the SC-450 LOCAL port. In addition,
the Local port can be assigned
a static IP address
and connected to the customer LAN for
remote access capability.
To Configure SC-450 for Remote or Local Management
1. Access the GUI interface of the SC-450.
2. Select the Management tab and then click IP Settings on the side bar menu.
Figure 3-4: SC-450 Management Tab
3. To change the LAN Port network settings, click the Modify button in the LAN Port
Configuration Area. The following dialog appears.
Figure 3-5: Modify IP Settings LAN Port Dialog
LAN Port
Configuration Area
LOCAL Port
Configuration Area