User's Manual

MobileAccessGX Installation and Configuration Guide 30
Figure 3-11: BTSC LTE 700NHz RF Parameters Tab
4. To control the service supported by this BTSC choose an option in the Service Control field:
• ON – Enables Service
• OFF – Disables Service
5.
Under DL Power section of the tab, click Adjust and select the required value (dBm) and click OK.
Figure 3-12: DL Power Adjust Dialog
6. The DL power gain may be set automatically (AGC) or manually (DCA – Digital Control
Attenuation). To control the DL gain control, set the DL AGC Status:
• ON – Enables automatic gain control to compensate for input power variations. When
enabled, gain control is performed automatically.
• OFF – Disables automatic gain control and enables DCA to be set manually (DL DCA
Manual Override Value).