User's Manual

MobileAccessGX Installation and Configuration Guide 31
7. UL Atten. Value – Controls attenuation on the uplink. This value is set during
manufacturing and should be modified only under special circumstances.
8. Sup. Parameters tab – Relevant only for the initial adjustment procedure of the complete
system (See LTE addendum document:
UMA_MA1000 MA2000_700MHz LTE AO ). Otherwise
disregard.
This option provides an internal signal generation source that can be used during the
adjustment procedure instead of connecting an external signal generator.
Figure 3-13: BTSC LTE 700NHz Sup. Parameters Tab
• ON – Internal signal source activated.
• OFF – Internal signal source disabled.