User's Manual
Table Of Contents
- Preface Material
- Policy for Warrantee and Repair
- Safety Instructions
- Warnings and Admonishments
- Standards and Certification
- About this Guide and Other Relevant Documentation
- Table of Contents
- 1 Introduction to GX System
- 2 System Installation
- 3 Commissioning MA Head-End
- 4 Provisioning the MobileAccessGX
- Appendix A: System Specifications
- Appendix B: Ordering Information
- Appendix C: Site Preparation
MobileAccessGX Installation and Configuration Guide 23
3. Open a Web browser and enter the SC-450 default address: 10.1.1.1.
Figure 3-2:SC-450 Default Address
The SC-450 has been optimized for use on IE 6.0 and Firefox 3.0 or higher.
NOTE: For proper display on IE 8.0 use compatibility mode by selecting Tools ->
Compatibility View Options and Add the SC-450 website 10.1.1.1.
The Login dialog appears.
Figure 3-3: SC-450 Login Dialog
4. Enter User Name and Password as provided by system administrator.
NOTE: To open a session with configuration privileges, the user must be assigned a “system
administrator”
or “
RF Tech”
access level.