User's Manual

System Installation
P/N 709C010701
Page 32
3. Connectors facing downwards, hook the GX-Quad on to the top part of the bracket and then
to the bottom. Refer to Figure 3-11.
4. Using a spanner or wrench, tighten the two (2) M8 nuts on the top and bottom of the
mounting bracket as shown in Figure 3-11 and Figure 3-12.
NOTE: It is recommended to use a threadlocker to tightly seal the nuts.
Hooking GX-Quad to
Bracket
Figure 3-11
Pole Mounted GX – Bottom
View
Figure 3-12
Pole Mounted GX-Quad
Figure 3-13