User's Manual
Table Of Contents
- Preface Material
- Policy for Warrantee and Repair
- Safety Instructions
- Warnings and Admonishments
- Standards and Certification
- About this Guide and Other Relevant Documentation
- Table of Contents
- 1 Introduction to GX System
- 2 System Installation
- 3 Commissioning MA Head-End
- 4 Provisioning the MobileAccessGX
- Appendix A: System Specifications
- Appendix B: Ordering Information
- Appendix C: Site Preparation
MobileAccessGX Installation and Configuration Guide 20
2.6 Verifying Normal Operation
Upon powering up the GX remote unit:
Confirm the fans are working after powering.
Verify normal operation:
LED
Description
RUN
Flashing Green -
Flashes green for the duration of a minute upon system
initialization
Off -
System initialized
FSK
Flashing Green -
Flashes (rate of flash per second) for the duration of 1 minute
upon communication initialization
Rapid/No Flash -
Indicates communication fault
ALM
Steady Red -
Fault
Off -
Normal operation