User's Manual

Corning Restricted
Corning Optical Communications User Manual I CMA-482-AEN I Page 42
6. Push up and pull down Lift Bracket into plate and verify that connection cables are not subject to kinking.
Note: The installer is solely responsible for proper cable wiring and routing of the RAU5x unit per instructions provided in
relevant Corning documentation.
Figure 4-12 Verifying that Cable Path is not Obstructed
7. Lock “Lift Bracket” into plate - push RAU5x and Lift Bracket back up into plate and lock RAU5x into place by closing the
rotary knobs in the indicated direction.
Figure 4-13. Closing Rotary Knobs
8. Fit antenna skirt onto RAU5x.