User's Manual

Corning Restricted
Corning Optical Communications User Manual I CMA-482-AEN I Page 44
4.3.2.3 Top Bracket Cap Assembly
This section provides instructions on how to assemble the cap onto an installed RAU5x and “Top Bracket” assembly which
does not include the Corning plug-in external antenna.
Note the following:
• Cap, RAU5x and Top Bracket are each ordered separately.
• ATTENTION! In addition to the RAU5x and Top Bracket, the cap must also be secured to a permanent structure using the
provided safety cable!
• The cap complies with the 3-in clearance requirement above and below the RAU5x to allow airflow cooling.
Package contents
The BR-TOP-CAP kit consists of the cap for the RAU5x Top Bracket kit.
Figure 4-15. BR-TOP-CAP
Additional required items (not provided)
• RAU5x Top Bracket - for installing RAU5x in acoustic ceilings: BR-RAU5US-TOP (ordered separately)
• RAU5x without plug-in external antenna