User's Manual

Corning Restricted
Corning Optical Communications User Manual I CMA-482-AEN I Page 47
4.3.3 Wall Bracket Mount
This section provides instructions on how to assemble up to two RAU5x units onto the wall-mount bracket and mount
assembly onto wall.
Note: In this scenario, RxU67 can only be connected on the side, after completing the mounting.
General Information
• The instructions provided are intended for concrete/brick walls.
• The RAU5x wall-mount bracket is only used with RAU5x models not including the preassembled external antenna.
WARNING: The site engineer or contracted installer is responsible for all safety issues and procedures on-site.
4.3.3.1 Package Contents
The BR-RAU5US-WALL kit consists of the wall-mount bracket and two standard RAU5x brackets preassembled onto each
side of the wall-mount bracket door.
Item
Quantity
Wall-mount bracket
Note: Refer to Appendix A:
Bracket Dimensions for wall-
mount bracket dimensions.
1
Standoff mount (preassembled
onto each side of the bracket
door)
2
Drilling template – used for
marking holes for drilling
1
Table 4-3. BR-RAU5US-WALL Kit Package Items