User's Manual

Corning Restricted
Corning Optical Communications User Manual I CMA-482-AEN I Page 49
2. Align bracket with marked holes and drill anchors through bracket keyholes.
ATTENTION! The installer is responsible for accommodating the installation to the surface type.
Note: Insert the bolts in anchors and tighten until bolt head is 0.5” in from surface of wall.
Figure 4-20. Drilling Anchors through Wall-Mountable Bracket Keyholes
3. Hang bracket on anchors and tighten.
Figure 4-21. Mounting and Securing Bracket to Anchors