User's Manual
Corning Restricted
Corning Optical Communications User Manual I CMA-482-AEN I Page 53
4.4.2 Connect the Cables
Route the ground, RF, fiber and power cables located previously, between the standoff mount bracket and the RAU5x
towards the interface connectors.
Note: for each cable connection, two figures are shown: one indicating a configuration without RxU67, and the other showing
a greenfield installation WITH Rxu67.
Connect the cables as follows.
• Grounding Connection
• Optical Fiber Connection
• Main Power Connections
• RF Connections
• Antenna Connections
4.4.2.1 Grounding Connection
Connect the earth ground to the unit’s 8-32 x 3/8 grounding screw. See Figure 4-25 for location of ground connection.
Figure 4-25. RAU5x Grounding and optical fiber pair Connection