User's Manual

ManualsBrandsCorning Optical Communication ManualsElectronicsCorning Optical Network Evolution (ONE) Solutions 600MHz and FirstNet700 Remote eXpansion Unit (RXU67)

 
Corning Restricted 
Corning Optical Communications                              User Manual I CMA-482-AEN I Page  56 
4.4.2.4  RF Connections 
The RF connections depend on the specific configuration add-ons (with / without RxU67, RxU2325, GEM).   
Refer to the section relevant to your deployment: 
•  For Installations that include RxU67 Add-on, 4.4.2.4.1 
•  For Installations without RxU67, 4.4.2.4.2 
•  For RAU5x Installations that include RxU2325, 4.4.2.4.3 
•  For RAU5x Configurations that include GEMs, 4.4.2.4.4 
4.4.2.4.1  For Installations that include RxU67 Add-on 
Connect the cables between the RxU67 and the cavity Filter 
1.  Open the RxU67 cable kit 
2.  Select the cables with the appropriate length for your deployment (cavity on top /on side panels of RAU5x) 
3.  Connect the cables between the filter and RXU67/RAU according to their color and label   
   
Figure 4-27. RAU5x with RxU67 - Cable Connections to filter 
4.4.2.4.2  For Installations without RxU67 
Connect optic fiber pair to RAU5x module LC APC optic connector. See Figure 4-28. 
 
Figure 4-28.    Ground, Fiber and RF Cable Connections for RAU5x 
   