User's Manual

Corning Restricted
Corning Optical Communications User Manual I CMA-482-AEN I Page 76
7.2.2.2.2 Connect the RXU67-on-RAU Mounting Bracket to the RAU
1. Access the RAU (if needed – e.g. for dual-mounted RAUs – open the mounting door).
2. Selected the optimal mounting position (see previous section)
3. Open the RXU67-on-RAU Mounting Bracket by releasing the screw.
4. Slide the bracket on the RAU unit, on top of the fins.
5. Secure the bracket to the RAU by closing the screw manually and firmly.
Figure 7-5. Attach cavity filter
7.2.2.2.3 Connect the RXU67-on-RAU Mounting Bracket to the Cavity filter
1. Insert the bracket into the shoulder screws, slide the bracket downwards, and secure with the plunger.
2. Tighten the bracket to the RAU using the manual safety screw.
3. Pull the plunger pin outwards, to allow inserting the bracket.
4. Slide the Cavity filter’s shoulder screws into the key holes of the RXU67-on-RAU Mounting Bracket and pull towards the
narrow end of the key holes.
Figure 7-6. Slide bracket on shoulder screws & Secure