Spec Sheet

Corning Optical Communications
Everon™ 6000 Gen 2 DAS Solution Specification Sheet | CMA-818-AEN
Corning Restricted
System Architecture: Everon™ 6000 Gen 2 Solution
RIU—Radio Interface Unit
The RIU provides an interface and signal conditioning to signals coupled between the base station RF antenna ports and
the DCU.
DCU—Digital Conversion Unit
The DCU provides RF to CPRI (Downlink) and CPRI to RF (Uplink) conversion, where the well-known CPRI (Common
Public Radio Interface) standard is used for representing the RF signals.
DEU– Distributed Extension Unit
The DEU is the central Hub and Distribution element for the Everon™ 6000 Gen 2 Solution. The DEU interfaces between
the DCU and the remote unit, allowing it to receive the operators service signals in CPRI format, and to route these
signals to the remote antenna units. The DEU supports all Corning digital remote antenna units’ flavors, for all services,
power levels and antenna configurations (SISO or MIMO). Each DEU includes 2 optical ports connected to a DCU, 2
optical ports for cascade, and 24 optical ports for connection to remote units. When more remote antenna units are
needed, the system scales up easily by adding additional DEUs.
Service
Provider
#N
A
RIU
A
DCU
A
DEU
Base
stations
Digital
Conversion Units
Radio
Interface Units
Distributed
Extension Units
A
DHRU
A
DLRU
A
DMRU
Medium Power
Remote Units
High Power
Remote Units
Remote Operator
Configuration
and NMS
Local
Configuration
Low Power
Remote Units