Instruction Manual

and the software upload progress will be displayed in real time under
progress . When the progress promp t is 100%, it means that the software
package has been uploaded.
Figure 5.1-3 RIU software upgrade progressing
Step4: wait for the software upload to complete, click OK . And wait for
the device reset to complete (the front panel of the device's run light
flashes for 1s, indica ting that the device reset is complete).
5.2 DCU software upgrade instructions
Step1: connect the network cable connecting the local commissioning
computer to the DCU network elemen t.
Step2: as shown in figure 5.2 -1 , click Function —Firmware—Scan to
enter the DCU software package selec tion page, and import the DCU
device software package DCUG2_V01.00.01.41.dnl to device storage
area.