Instruction Manual

Figure 6.2-1 topology switching area
Click DCU-RF config and set the band, BW, Signal Mode and RF sw itch
of channel 5`8 as foll ows:
Channel 5: Band is N 3500F, BW is 250M , Signal Mode is TDD -NR, and
RF Switch is on.
Channel 6: Band is N 3500F, BW is 250M , Signal Mode is TDD -NR, and
RF switch is on.
Channel 7: Band is N3500G, BW is 280m, Signal Mode is TDD -NR,
and RF switch is on .
Channel 8: Band is N3500G, BW is 280m, Signal Mode is TDD -NR,
and RF switch is on .
UL ATT and DL ATT are the attenuation values of uplink and downlink
channels respectively, and the size o f signal output can be adjusted
according to use r needs.