Instruction Manual

➢ ANT2 of RRU is connected to TX5/RX5, TX6/RX6, TX7/RX7 and TX8/RX8 of
RIU;
RIU->DCU (It request to connect RF cable and network cable between RIU and RCU):
➢ Connect the "PREV" of the RIU panel to the "to RIU" of the DCU panel with the
network cable;
➢ TX1 and RX1 of RIU1 are connected to SISORX3 and SISOTX3 of DCU;
➢ TX2 and RX2 of RIU1 are connected to SISORX4 and SISOTX4 of DCU;
➢ TX3 and RX3 of RIU1 are connected to MIMORX3 and MIMOTX3 of DCU;
➢ The TX4 and RX4 of RIU2 are connected to the MIMORX4 and MIMOTX4 of
DCU.
4 Configuration instructions before accessing WEB
OMT
After the RIU, DCU, DEU and dLRU are connected to the local
computer th rough the ne twork cable respe ctively, the relevant settings of
the network parame ters of the local computer are required before the
normal use of WEB-OMT to access the system. The setting of computer IP
is shown in figure 4.1 -1:
Figure 4.1-1 computer IP settings