User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 3 of 174
Preface Material
About this Manual
This manual describes how to install, use, configure and manage Corning’s Everon™ 6000 1.0 platform. It
includes a description of the system end-to-end first time and on-going configuration, management and
maintenance.
Intended Users and Scope
This manual is intended for Corning system installers, technicians and users. It is assumed that the user is
familiar with the system and its units, and understands the basic functionality of the system.
Contacting Technical Support HelpDesk
Corning technical support contact information:
email: [e-mail]
Tel: [800] 787 1266
Legal Notice
Copyright
Copyright © 2021 Corning., All Rights Reserved
Disclaimer
This document contains proprietary information of Corning and may not be reproduced in any form
without the prior written consent of Corning.
No part of this document may be reproduced, translated, stored in a retrieval system or transmitted in any
form and by any means, electronic, mechanical, photographic, photocopying, recording, or otherwise,
without the prior written permission of Corning.
Information provided in this document is subject to change without notice and does not represent a
commitment on the part of Corning.
All products and company names are trademarks or registered trademarks of their respective holders.
Software License Terms
The software and the system design is the property of Corning.
It is supplied to the user to be used solely for its stated purposes. It is strictly forbidden to make copies of
the software or transfer it in any way, for any purpose, to any third party.
The license to use the software is granted to the user only for the specific system it is installed on by
Corning, or its authorized distributors and representatives.