User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 52 of 174
2.4 Additional stack and DRU connections
¾ For connections to additional IHU or HEU and DRU units:
Using the appropriate length ERFC cable (according to distance of available OIX/RIX port) connect remaining
IHU RIX and OIX module connectors as follows:
Connections to additional IHU unit:
x IHU #1 RIX 9-Pin connector to the corresponding IHU #2 OIX module
x IHU #1 OIX 9-Pin connector to the corresponding IHU #2 RIX module
Connections to additional HEU and OIU units:
x IHU RIX 9-Pin connector to the corresponding connector on the OIX module of the additional OIU.
x IHU OIX 9-Pin connector to the corresponding connector on the RIX module of the additional HEU.
Note: The RIX and OIX modules of the additional HEU unit must also be connected.
See use cases for details, section 1.4.1