User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 59 of 174
LEDs
Type
Description and Behavior
Picture
Power LED
RUN LED
STAtus LED
Lit after SW initialization and during
operation.
LAN
(Ethern
et)
LED
General
system LED
behaviour
During power up all LEDS are lit
After SW initialization only power, run and
LAN are lit (The optical LEDS are off)
The following tables describe the DRU LEDs and the LED behaviour:
LEDs Type
Description and Behavior
Remote unit LEDs
Description: A pair of LEDs (Orange; Green) describes each port: the right pair
relates to the upper slot; the left pair relates to the lower slot.
Behaviour
: Right orange LED is lit during identification and when inserting the
connector. Left green LED is lit after CPRI link connection
Source LEDs
Description: A pair of LEDs (Orange; Green) describes each port.
Behaviour
: Right orange LED is lit during identification and when inserting the
connector. Left green LED is lit after link connection
Power LED
RUN LED
STAtus LED
Lit after SW initialization and during operation.
LAN (Ethernet) LED
General system LED
behaviour
During power up all LEDS are lit
After SW initialization only power, run and LAN are lit (The optical LEDS are off)