User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 79 of 174
2.7.2 MRU Interfaces
Warning! In the event that a PAM or the OPTM needs to be removed from the chassis, make
sure to first press the release button on the module and then pull out using the handle (see Error!
Reference source not found.). Any attempt to pull out the module without first releasing may
cause damage.
Corning will not be liable for damage of products resulting from improper handling during
installation or repair.
PAMs are entered to their relevant slots by matching the color of the PAM and the color on top
of the slot.
Notes:
* MRU chassis requires 6U rack height availability
* Rack nuts and screws not provided
* Digital optical module & FAN are pre-installed in the chassis
External
Alarms
3.5 GHz
Management
port
SFPs
AC/DC
Connector
Antenna
Test
Units’ Release
button and
handle
DPAM Modules
FANs
Handle
Release
button