User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 80 of 174
2.7.3 Mount chassis in 19-in Rack
Note: for dimensions and specifications refer to chapter 7
1. Before mounting the chassis: unwrap each of the PAMs, and enter each PAM to its dedicated slot inside
the chassis, according to the color-codes:
2. Determine the location of the MRU in the rack while considering additional units (e.g. power supply)
3. Referring to Figure 11 secure the units’ rack ears to the rack frame as follows:
a. Insert two screws halfway into the rack frame (one on each side)
b. Position the bottom half slots of the chassis rack ears onto the screws
c. Secure the unit in the rack via remaining applicable bracket holes using the appropriate rack
nuts and screws
Figure 11. Example of MRU Chassis Rack Installation