User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 104 of 174
4.2.1.3 Max Input
The Max Input tab allows the configuration of three parameters for each RIM:
x Max Expected Power - UL gain range enabled is determined by the max expected power setting
x UL Gain Mode - Set the UL Gain Mode for the selected RIM
x UL Gain Value – Set UL gain (dB) for the selected RIM
A single RIM can be clicked to be configured. Alternatively, a group of RIMs can be configured by selecting a
service group, chassis or a frequency band.